The Siemens 6SL3320-1TE41-0AA3 is a SINAMICS Single Motor Module. Siemens Industry Mall lists the exact article with 510–720 V DC input, 0–480 V three-phase AC output, 985 A output current and a 560 kW type rating. The manufacturer also identifies the unit as an IP00 built-in module with internal air cooling and a DRIVE-CLiQ cable. Auto2mation records a 426 kg assembly weight and the associated power-block number 6SL3352-1AE41-0FA1.

There is one source difference that should be retained rather than hidden: Auto2mation records DC 510–750 V on the assembly data, while the current Siemens Industry Mall entry for the exact 6SL3320-1TE41-0AA3 article states DC 510–720 V. Auto2mation also records 3 AC output up to 0.75 times the input voltage, 985 A and 0–550 Hz. Engineers should therefore confirm the rating plate and original machine documentation for the exact installed revision when the upper DC-link value matters.

Key Features & Specifications

The table preserves both verified DC-input values instead of silently reconciling them.

• Manufacturer Part Number: 6SL3320-1TE41-0AA3
• Product Family: SINAMICS Single Motor Module
• Auto2mation DC Input: 510–750 V
• Siemens DC Input: 510–720 V
• Output Current: 985 A
• Siemens AC Output: 0–480 V 3 AC
• Auto2mation Output Frequency: 0–550 Hz
• Type Rating: 560 kW
• Protection: IP00
• Cooling: Internal air cooling
• Associated Power Block: 6SL3352-1AE41-0FA1
• Weight: 426 kg

Technical Specifications

Specification	Details
Manufacturer	Siemens AG
Model	6SL3320-1TE41-0AA3
Family	SINAMICS Single Motor Module
Auto2mation DC Input	510–750 V
Siemens DC Input	510–720 V
Output Current	985 A
Siemens AC Output	0–480 V 3 AC
Auto2mation Output Frequency	0–550 Hz
Type Rating	560 kW
Protection	IP00
Cooling	Internal air cooling
Associated Power Block	6SL3352-1AE41-0FA1
Weight	426 kg

Applications & Use Cases

The module is intended for SINAMICS S120 drive systems where a Single Motor Module converts DC-link power into controlled three-phase output for a motor. The exact article should be matched within the existing industrial automation drive architecture rather than selected only by power.

The 985 A output current and 560 kW type rating are strong identification points, while the DC-link discrepancy between the live Auto2mation assembly data and current Siemens product entry should be checked against the installed rating plate. Cooling, cabinet layout and the connected motor remain part of the system-level selection.

Why Choose the Siemens 6SL3320-1TE41-0AA3

The exact Siemens article number gives a manufacturer-defined combination of current, power, enclosure format and cooling. That combination is more meaningful for replacement than a generic “560 kW motor module” description.

The associated 6SL3352-1AE41-0FA1 power-block identification on Auto2mation provides another assembly matching point. It should be used alongside, not instead of, the main 6SL3320-1TE41-0AA3 article number.

Preserving the 510–750 V Auto2mation value and 510–720 V Siemens value is important because both are verifiable. The safest interpretation is to check the exact installed revision rather than assume the broader range applies universally.

Compatibility & Integration

Verify the complete article number, DC-link voltage, 985 A output requirement, motor rating, cabinet cooling and existing SINAMICS S120 configuration before replacement. For manufacturer-level reference, consult the Siemens Industry Mall product entry for 6SL3320-1TE41-0AA3.

If the rating plate differs from either source, use the original Siemens documentation for that installed revision and the machine builder’s electrical drawings to resolve the mismatch.

Maintenance & Support

Maintenance should follow Siemens documentation for the SINAMICS S120 chassis unit. Internal air-cooling paths, electrical connections and cabinet cleanliness are practical inspection points for this IP00 built-in module.

After servicing, confirm DC-link polarity and connections, motor-side wiring, DRIVE-CLiQ connections and cabinet airflow before restoring operation.

Frequently Asked Questions

Q1: What output current does Siemens list for 6SL3320-1TE41-0AA3?

Siemens lists 985 A output current.

Q2: What type rating is listed?

The Siemens product entry lists a 560 kW type rating.

Q3: Why are two DC-input ranges shown?

Auto2mation records 510–750 V DC, while Siemens Industry Mall currently lists 510–720 V DC for the exact article number.

Q4: What associated power block is shown on Auto2mation?

The listing identifies 6SL3352-1AE41-0FA1.

Q5: What should be verified before replacement?

Check the complete article number, DC-link range, output current, motor data, cooling arrangement and existing S120 configuration.

Related Products

Explore related products and verified Auto2mation category links relevant to this equipment:

• Siemens 6SL3330-6TE41-1AA3 Smart Line Module
• SIMOVERT VC DC inverter chassis unit
• Browse Siemens products on Auto2mation
• Industrial Automation on Auto2mation